Fitted wardrobes
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Made-to-measure wardrobes and walk-in wardrobes · Gandia
If you're thinking about made-to-measure wardrobes in Xeraco, the starting point is what you need to store and the space you have, not anyone's catalogue. Shoes, suitcases, summer and winter clothes, bed linen: each thing needs its own place and height. With that information you can put together a layout in the configurator and send it in, so the team can review it and give you guidance on the cost of your project.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Solutions in Xeraco
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Complete wardrobes with doors that need no room to open. With mirror, glass or other finishes.
Ideal if the bed is close by or you have less than 1 m clear in front.
Open or closed, straight, L-shaped or U-shaped. Laid out around what you store, not around a standard module.
Ideal from around 1.5 m wide.
02 — In Xeraco
Imagine that in your home in Xeraco, or in a property near the Platja de Xeraco, the wardrobe has become too small, and the cause isn't the clothes but everything piling up around them: twenty pairs of shoes, bags, belts, caps and this season's flip-flops. Before drawing anything, it's worth taking all of it out, grouping it by size and counting how many pairs of shoes you wear every week and how many you wear only once a year.
A simple decision comes out of that count. Everyday shoes fit on tilted trays about 20 centimetres high each, at hand height. Boots need their own vertical section of 40 to 50 centimetres, and the ones you wear once a year can go up into a top cupboard. Belts and ties call for a shallow drawer with dividers, and bags for a shelf with a stop so they don't lose their shape.
With that arrangement in mind, the usual approach is to set aside a narrow column, between 40 and 60 centimetres wide, just for shoes and accessories. That way the hanging area stays free for shirts and dresses. That column goes into the design in the configurator as just another module, and it's fine-tuned at the measuring visit, once the real wall measurements are known.
Tell us about your space
A made-to-measure wardrobe project in Xeraco starts the same way as anywhere else: with three measurements and a list. The measurements are the width, height and depth of the space, taken at the top, in the middle and near the floor, because a wall is almost never perfect and a couple of centimetres' difference decides how the last module fits.
The list is of what you want to put inside. Note down how many garments you hang, how many you fold and how many bulky items you store through the year: suitcases, blankets, the beach parasol, sports kit. If you share the wardrobe with someone else, split the list in two and give each person their half of the rail and drawers. That split can sometimes change the design completely.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
There is no ideal structure in the abstract; the right one depends on the bedroom. If you have a free wall from corner to corner, a fitted wardrobe makes use of every centimetre and hides the structure behind plain doors. If the space in front of the unit is tight, sliding doors avoid the swing arc and let you walk past with the bed just a step away.
When you have a spare room, the conversation moves on to a made-to-measure walk-in wardrobe, where the walkway matters more than the front. Here you need a central aisle of about 90 centimetres and units on both sides or in an L shape. A compact walk-in wardrobe, whether in Xeraco or in a home around Gandia, can turn out more comfortable than a large wardrobe that's badly laid out.
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
The interior is what you use most, so it's worth giving it more time than the colour of the doors. A hanging rail at about 100 centimetres suits shirts and jackets, and one at about 150 suits long dresses. Between the two heights there is usually room for a second rail or a block of drawers, and that choice changes the wardrobe's real capacity.
Drawers deserve a separate decision. Those for underwear and socks can be shallow with dividers; those for jumpers, deeper and without dividers, so they can be folded comfortably. Adjustable shelves help when you store things of varied sizes, and fixed ones give more rigidity when the unit is very wide.
The cost of a wardrobe depends on a few factors, and it's worth knowing them before you configure. The first is size: the number of square metres of front and the height. The second is the type of door, because sliding doors have tracks and fittings that hinged ones don't need. The third is the interior: the more drawers and accessories, the higher the figure.
The fourth factor is the finishes, both outside and inside, and the fifth is the site conditions: an uneven ceiling or a special skirting board means cutting and finishing to measure. In the configurator you enter these variables and the team, with the configuration and measurements, gives you a guide figure within the following 24 hours, at no cost.
Xeraco is a municipality in the Safor district, in the province of Valencia, and its Platja de Xeraco area is a few kilometres from the town centre. For your project, all that matters is the exact address of the job, which is confirmed with you before anything is organised, and the Ayuntamiento de Xeraco, which is who you'd ask if your renovation requires any paperwork.
Once the estimate seems reasonable to you, the measuring visit at your home is arranged. That visit costs €50 if no order follows and is free if one does. During it we check squareness, plumb and the condition of the floor and ceiling, and finalise the measurements used to draw up the final quote.
The wardrobe takes around two to three weeks to make on average; the fitting is agreed separately. If you live in a building with a residents' association, let them know in good time so access for the pieces can be reserved. The whole process is described in how we work, and you can browse the other areas in and around Gandia.

Many homes on the coast near Gandia are used seasonally, and that changes the storage needs. If in your home in Xeraco or the Platja de Xeraco you alternate weeks of staying and weeks away, the wardrobe becomes a place where clothes wait. A good option is to divide it into an everyday-use zone and a reserve one, with closed shelves for covers and bed linen.
The doors matter too. A front that closes well limits the dust getting in during the months when the home is empty, and an interior with ventilated shelves stops stored clothes picking up a musty smell. A top cupboard with its own doors works well for suitcases, hammocks and beach towels.
Xeraco belongs to the Safor, the district of the province of Valencia centred on Gandia, and from the Platja de Xeraco to the town centre the distances are short. That makes it easier to group tasks: if you're renovating a home in Xeraco, it's best to request the measuring visit once the walls are plastered and painted and the final flooring is laid.
A sensible order is this: first the building work, then the measuring, then manufacture and finally installation. If you measure before finishing the renovation, the wardrobe may end up too short or too long for the real floor. If your home in the Platja de Xeraco or the town centre is occupied, it also matters that the space is clear of furniture on the day of the visit.
Quote
With your name, a phone number and a photo of the space, we can get started.
What happens next
Frequently asked questions
Set aside a dedicated column of 40 to 60 centimetres with tilted trays for everyday shoes, a tall section for boots and a drawer with dividers for belts. That way the hanging area stays free for clothes. In the configurator you can add that column as just another module.
With the width, height and depth of the space, a front-on photo and the type of doors you prefer, the team can study the design. If there's a radiator, sockets or a window nearby, let us know. The last few millimetres are confirmed at the measuring visit.
You give us the address when you send the configuration or the form, and we confirm it with you before planning the measuring visit. Whether the home is in the town centre or at the Platja de Xeraco doesn't change the method, only the logistics of the visit.
Yes, with approximate measurements you can put together a layout and receive a guide estimate. To manufacture, the real measurements are needed, and these are taken at the visit.
A piece of built-in furniture inside a home doesn't normally need a licence, but if your renovation involves more extensive work, it's worth checking with Xeraco Town Council. In a block of flats, also check the permitted working hours and the rules on using the lift.
Open the configurator, arrange your shoes, clothes and accessories in a layout and send it to us with your measurements. You'll receive a guide estimate for your project in Xeraco.